MATLAB三维图像处理：加坐标轴等x=-3:0.02:3;y=-1:0.02:5;[x,y]=meshgrid(x,y);z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;mesh(x,y,z)x=-3:0.02:3;y=-1:0.02:5;[x,y]=meshgrid(x,y);z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;C=contour(x,y,z,40);clabel(C)1.怎

MATLAB三维图像处理：加坐标轴等x=-3:0.02:3;y=-1:0.02:5;[x,y]=meshgrid(x,y);z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;mesh(x,y,z)x=-3:0.02:3;y=-1:0.02:5;[x,y]=meshgrid(x,y);z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;C=contour(x,y,z,40);clabel(C)1.怎
MATLAB三维图像处理：加坐标轴等
x=-3:0.02:3;
y=-1:0.02:5;
[x,y]=meshgrid(x,y);
z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;
mesh(x,y,z)
x=-3:0.02:3;
y=-1:0.02:5;
[x,y]=meshgrid(x,y);
z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;
C=contour(x,y,z,40);clabel(C)
1.怎样变成灰度图?怎样去掉盒子背景?留下坐标系和图像即可
2.怎样加坐标线?坐标线粗0.5磅

MATLAB三维图像处理：加坐标轴等x=-3:0.02:3;y=-1:0.02:5;[x,y]=meshgrid(x,y);z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;mesh(x,y,z)x=-3:0.02:3;y=-1:0.02:5;[x,y]=meshgrid(x,y);z=0.5*x.^2+0.5*(y+1).^2-log(y+1)-0.5;C=contour(x,y,z,40);clabel(C)1.怎
方法一：set(get(gca, YYLabelY), YRotationY, 1); 方法二：画好图以后点选Y轴标注,把属性里的Rotation改为1.实际上可以取任意角度.